You will need to strip your diapers if you have residue or diaper odor. Residue can be caused by hard water, diapers than are not cleaned or rinsed thoroughly, detergents, or from greasy products such as diaper creams or fabric softeners. You could also have soap scum if you use a non-approved soap or detergent. Following are the instructions for diaper stripping. Strip only as needed, as it can be harsh on your diapering products. Â Standard machines: Maximum load size is 24 XS/S or 18 M/L diapers. Starting with clean diapers:
- Fill machine with Hot water on the highest water level, using a heavy cycle.
- Add 2 Tablespoons of Dawn Classic dish soap to the wash water and agitate for about 10 seconds.
- Add diapers and run wash cycle, adding two extra warm rinses.
- If the rinse water is slimy or has any bubbles during the last rinse, you should add another rinse.
~Sonya
Thank you for the HE advice. I wish I had a non-HE washing machine just for washing diapers. It seems like it would make life much easier!
Thanks for the great info. I am thinking of doing a strip on my diapers before baby #2 comes along :)
helpful :)
Thank you!!! Thank you!!! Thank you!!! I hear about striping all the time and now I know what to do in my HE machine!
How much calgon should you use for hard water?
You're viewing 6-10 of 27 comments